Fosroc Structuro 300D1
High-performance superplasticising admixture engineered for high early and ultimate strength concrete with extended workability retention.
What is it?
Fosroc Structuro 300D1 is a high-performance superplasticiser (high-range water-reducing concrete admixture) from Fosroc’s Structuro range, formulated to deliver increased early and ultimate compressive strength alongside long workability retention.
Where is it used?
Used in ready-mix and site-batched concrete for self-compacting concrete, pumped concrete, precast yards and high-performance structural concrete across infrastructure, commercial and residential projects in India.
Why use it?
It lets producers achieve flowable, easily placed concrete at a reduced water-cement ratio, which raises strength, lowers permeability, improves durability and reduces shrinkage and creep without sacrificing workability.
How is it applied?
Dosed as a liquid into the mixing water or added to the concrete during batching at the producer’s trial-established dosage; it is never applied to hardened concrete. Mix design and dosage are confirmed by site trials before production.
About Fosroc Structuro 300D1
Fosroc Structuro 300D1 belongs to the Structuro family, Fosroc’s premium range of superplasticising admixtures for high-performance concrete. As described on the official Fosroc product page, it is “a high performance superplasticiser intended for applications where increased early and ultimate compressive strengths are required.” In practical terms, it is a high-range water-reducing admixture: at a fixed slump or flow, it allows the concrete producer to remove a significant portion of the mixing water, and that reduction in water-cement ratio is what drives the gains in strength, density and durability.
For an Indian ready-mix or precast producer, the value of Structuro 300D1 is that it solves two problems at once. Conventional mixes face a trade-off between workability and strength, more water makes concrete easier to place but weaker and more porous. A high-performance superplasticiser breaks that trade-off by dispersing cement particles so the mix flows freely even at low water content. Structuro 300D1 is positioned at the demanding end of this category, where the brief is not just flow but high early strength for fast formwork cycles and high ultimate strength for structural performance.
The product is supplied as a ready-to-use liquid that is metered into the mixing water during batching. It is intended for controlled production environments, ready-mix plants, precast factories and well-supervised site batching, where dosage can be calibrated by trial mixes and held consistent. Space Arc Engineering supplies Structuro 300D1 as an authorised Fosroc distributor serving Delhi NCR and Pan-India, with technical support to help producers fit the admixture into an existing mix design rather than treating it as a drop-in replacement.
The technical insight
The defining mechanism of a high-performance superplasticiser like Structuro 300D1 is steric and electrostatic dispersion of cement grains. Cement particles in fresh paste tend to flocculate, trapping water inside loose clusters. The admixture coats the particles and pushes them apart, releasing that trapped water as free lubricating water. The result is that a mix needing, say, a moderately high water content for placeability can be produced at a much lower water-cement ratio while flowing just as freely. Because compressive strength, permeability and durability of hardened concrete are governed largely by water-cement ratio, this single change cascades into the benefits Fosroc lists for the product: increased early and ultimate compressive strength, increased flexural strength, a higher elastic (E) modulus, lower permeability, better resistance to carbonation, improved adhesion to reinforcing and prestressing steel, and reduced shrinkage and creep. The “300D1” designation sits within Fosroc’s wider Structuro numbering, where different grades are tuned for different balances of early strength, slump life and flow. Structuro 300D1 is positioned for applications where early strength is a priority, useful where formwork must be struck quickly or precast elements demanded faster, while also retaining workability long enough to handle pumping and self-compacting placement. Note that exact numeric properties (specific gravity, chloride content and dosage range) are published in the region-specific Fosroc technical data sheet, which should always be obtained for the project location and used as the binding reference for mix design.
Where it is used
- Self-compacting concrete (SCC) for congested reinforcement and architectural elements
- Pumped concrete for high-rise and long-distance placement
- Precast and prestressed concrete elements needing fast formwork turnaround
- High-performance structural concrete with high early and ultimate strength targets
- Concrete requiring very long workability retention during transit and placement
- Durable concrete for aggressive exposure where low permeability and carbonation resistance matter
Key advantages
- Increased early compressive strength, supporting faster formwork striking and precast demoulding
- Increased ultimate compressive strength and increased flexural strength
- Higher elastic (E) modulus for stiffer, better-performing structural concrete
- Lower permeability and better resistance to carbonation, improving long-term durability
- Improved adhesion of concrete to reinforcing and prestressing steel
- Reduced shrinkage and creep, lowering risk of cracking over the service life
- Enables self-compacting and pumpable mixes at reduced water-cement ratio
- Long workability retention, helping in hot Indian conditions and longer haul times
Limitations & considerations
- It is a concrete admixture, not a repair or surface product, it works only when batched into fresh concrete, not applied to hardened concrete
- Optimum dosage must be established by trial mixes; overdosing can cause excessive retardation, bleeding or segregation
- Performance depends on cement chemistry, supplementary materials (fly ash, GGBS), aggregates and ambient temperature, so results vary between mixes
- Compatibility with other admixtures must be verified before combining in the same mix
- Exact specific gravity, chloride content and dosage are region-specific and must be read from the local Fosroc TDS for the project, not assumed
- Requires controlled batching and quality control; it is less suited to uncontrolled hand-mixed site concrete
Selection & best practice
Always begin with laboratory and site trial mixes using the project’s actual cement, aggregates and supplementary cementitious materials to fix the optimum dosage before production, and obtain the current region-specific Fosroc technical data sheet for binding specifications. Add Structuro 300D1 to the mixing water or during the batching cycle as directed by the TDS, never to hardened concrete, and keep the dosage and water content consistent batch to batch. Verify compatibility before combining with any other admixture, monitor slump or flow retention through transit and pumping, and store the product in sealed original containers away from direct sun and frost. For self-compacting and pumped applications, validate flow, passing ability and resistance to segregation on the trial mix before scaling to production.
Specifications
| Product type | High-performance superplasticiser (high-range water-reducing concrete admixture) |
| Form | Liquid admixture, added during batching |
| Product range | Fosroc Structuro range |
| Primary function | Increased early and ultimate compressive strength with workability retention |
| Suitable for | Self-compacting concrete, pumped concrete, precast concrete, high-performance concrete |
| Application method | Metered into mixing water / concrete during batching at trial-established dosage |
| Specific gravity | Refer to region-specific Fosroc TDS (not published on public page) |
| Chloride content | Refer to region-specific Fosroc TDS (Structuro superplasticisers are typically chloride-free; confirm on local TDS) |
| Dosage | Refer to region-specific Fosroc TDS; established by site trials |
| Manufacturer | Fosroc (Saint-Gobain group) |
Industry use cases
Ready-mix concrete (RMC)
Producing pumpable, high-strength mixes for high-rise residential and commercial towers in Delhi NCR where concrete must travel and be pumped to height while retaining slump.
Precast and prestressed
Achieving high early strength so beams, hollow-core slabs and segmental elements can be demoulded and stressed sooner, increasing mould turnover in precast yards.
Infrastructure
Self-compacting and high-performance concrete for bridge segments, piers and heavily reinforced sections where vibration access is limited and durability is critical.
Industrial and commercial structures
Low-permeability, durable structural concrete for warehouses, plants and basements exposed to aggressive or carbonation-prone environments.
Architectural concrete
Free-flowing self-compacting mixes that fill complex formwork and produce a high-quality finish without honeycombing.
Frequently asked questions
What is Fosroc Structuro 300D1 used for?
Is Structuro 300D1 a waterproofing or repair product?
How does Structuro 300D1 increase concrete strength?
What is the correct dosage of Structuro 300D1?
Can Structuro 300D1 be used for pumped and self-compacting concrete?
Where can I buy Fosroc Structuro 300D1 in India?
How we position Fosroc Structuro 300D1
Structuro 300D1 sits at the high-performance end of Fosroc’s admixture portfolio. Within the Fosroc range, it is most directly comparable to other Structuro superplasticisers such as Structuro 351, 352 and 311, and to the Auramix range (for example Auramix 300) and the Conplast high-range water reducers like Conplast SP430, each tuned for different balances of flow, slump retention and early strength. Choose Structuro 300D1 specifically where high early strength plus durability is the priority, such as precast turnaround or fast-cycle structural work. Against competitor admixtures, it competes with Sika’s ViscoCrete polycarboxylate superplasticisers, BASF/Master Builders Solutions (MBS) MasterGlenium, and locally with offerings from Dr. Fixit (Pidilite) and STP. As with any superplasticiser, the right choice is mix-specific: the deciding factors are compatibility with your cement and supplementary materials, the target early and ultimate strength, slump-retention needs and verified trial-mix performance, not brand alone. Space Arc Engineering can help benchmark Structuro 300D1 against these alternatives for a given mix design and supply the correct region-specific technical data sheet.
Related Concrete Admixtures products
Source Fosroc Structuro 300D1 for your project
Authorised distribution, technical advice & professional application across Delhi NCR and Pan-India.