Industrial & epoxy flooring systems in India
Epoxy, PU-concrete, cementitious screeds and dry-shake hardeners — matched to your loading, chemicals and hygiene demands, sourced and applied from 7 authorised brands.
Five systems, ordered by duty
Industrial floors aren’t one product — they’re a spectrum from economical surface hardening to the heaviest chemical-resistant overlay. Find where your project sits.
Dry-shake hardener
Broadcast into fresh concrete and power-trowelled in — hardens the wear surface economically.
Thin-film epoxy coating
A light, cost-effective resin coating for surfaces that see foot and light trolley traffic.
High-build / self-levelling epoxy
A hard, chemically resistant, easily-cleaned resin floor, 1–3 mm.
Heavy-duty / chemical-resistant overlay
Epoxy-modified concrete or PU-concrete for the toughest floors, 4–9 mm.
Anti-static / ESD
Static-dissipative or conductive flooring engineered to a target surface-resistance spec.
Inside a flooring system: the build-up
Three genuinely different constructions, not one product applied at different thicknesses.
Cementitious screeds and toppings (e.g. UltraTech Floorkrete HS grades) sit underneath any of these three — they re-level a weak or uneven slab and act as underlayment before the resin finish goes down, rather than being a wear surface in their own right.
Five questions that decide the system
Loading & traffic
Pedestrian and pallet trucks tolerate thin-film or high-build epoxy. Hard-wheeled forklifts and heavy point loads call for thicker SL epoxy, a heavy-duty overlay, or a hardened topping.
Chemicals & hygiene
Incidental cleaning differs from constant acid, fat or solvent exposure — the latter pushes you toward chemical-resistant epoxy or PU-concrete with coved skirting for seamless, washable detailing.
Temperature & thermal shock
Hot wash-down, steam and freezer transitions rule out standard epoxy and favour PU-concrete rated for elevated and cyclic temperatures.
Substrate condition & moisture
Damp or new slabs need moisture-tolerant primers or PU-concrete. Weak or uneven slabs need a repair mortar or self-levelling screed first.
Slip resistance, ESD & aesthetics
Kitchens and wet areas need textured anti-slip profiles. Electronics, battery and clean-room areas need certified anti-static/ESD systems.
Different sectors stress floors in different ways
How the four main systems compare
Real stock, not a drop-ship promise
Space Arc Engineering is an Authorised Project Distributor and Applicator in India for Fosroc, Sika, Master Builders Solutions, MC-Bauchemie, STP, UltraTech and Dr. Fixit. Material moves through our own warehousing with batch and date records intact, so what reaches your site is genuine, current-dated stock — not repacked or grey-market material that cures inconsistently.
A genuine Fosroc option in almost every category
As an authorised Fosroc distributor and applicator, and Fosroc’s largest single flooring range on this site by product count, we lead with Nitoflor and Nitocote wherever the technology genuinely fits — and say so honestly where it doesn’t (PU-concrete/Ucrete is a Sika/MBS-specific technology).
Fosroc Durocrete
Dry-shake concrete floor hardener for industrial and warehouse floor surfaces.
Fosroc Nitoflor FC150
Two-component epoxy floor coating for industrial and commercial floors.
Fosroc Nitocote EP202
Solvent-free epoxy coating built for chemically aggressive environments.
Fosroc Expocrete
Epoxy-modified concrete overlay for heavy traffic and chemical-resistant surfaces.
Fosroc Nitoflor Conductive
Static-dissipative flooring for electronics and clean-room facilities.
Fosroc Nitoflor Coving U
Pre-formed coving profile for a seamless, hygienic floor-to-wall junction.
If you need…
Food, beverage, dairy or pharma plant with steam/hot wash-down and thermal shock
Specify a heavy-duty PU-concrete or epoxy-modified overlay — Sika/MBS Ucrete or Fosroc Expocrete — with coved skirting for a seamless, hygienic, thermal-shock-resistant finish.
General manufacturing or warehouse needing a clean, durable, easy-to-maintain resin floor
Use a self-levelling or high-build epoxy such as Fosroc Nitoflor FC150, Sikafloor or a MasterTop epoxy system over a sound, primed substrate.
High-traffic warehouse or logistics floor on a tight budget
Consider a dry-shake hardener such as Fosroc Durocrete broadcast into fresh concrete, or a robust high-build epoxy coating for the wear surface.
Electronics, semiconductor, battery or clean-room area with static-sensitive equipment
Specify an anti-static/ESD or conductive system such as Fosroc Nitoflor Conductive, MasterTop ESD or Sikafloor-235 ESD, designed to meet your target surface-resistance spec.
Weak, uneven or newly cast slab that needs levelling before a resin finish
Lay a high-strength cementitious topping or screed such as UltraTech Floorkrete HS grades as underlayment, then apply the epoxy/PU system once cured and dry.
Chemical, plating or process area with constant aggressive exposure
Choose a chemical-resistant solvent-free epoxy lining such as Fosroc Nitocote EP202, or a PU-concrete system with bunding and coving matched to the specific chemical.
Light pedestrian/trolley traffic with light to medium duty
A thin-film or high-build epoxy coating is cost-effective and quick to install — Sikafloor or a Fosroc epoxy system.
All Industrial Flooring products we supply
317 genuine industrial flooring products from our authorised brands — supplied & applied across Delhi NCR and pan-India.
Fosroc · 141 Preferred
MC-Bauchemie · 51
Sika · 51
Dr. Fixit · 1
Master Builders · 16
STP · 46
Why specify through an authorised distributor
Genuine, batch-traceable material
Every drum is sourced through authorised channels with current technical data sheets and warranty eligibility — never repacked or grey-market material that cures inconsistently.
Cross-brand, impartial recommendations
We carry Fosroc, Sika, Master Builders Solutions, MC-Bauchemie, STP and UltraTech, so we can substitute an equivalent system when lead time, budget or site conditions demand.
Full applicator service
Substrate testing, surface preparation (grinding, shot-blasting, moisture testing), primer and system build-up, trained laying crews, joint treatment and hygienic coving.
Specification & mock-up support
BOQ/specification drafting, sample mock-ups and on-site method statements before the whole floor is committed.
Repair & re-levelling
Damaged or uneven slabs are assessed and levelled with repair mortars or high-strength cementitious toppings before the finish system goes down.
Single-window accountability
Product, application and technical backup from one partner — reducing coordination risk and speeding delivery on projects across India.
Frequently asked questions
Which flooring system is best for a food or pharma factory in India?
For wash-down, steam cleaning and thermal shock, a heavy-duty PU-concrete or epoxy-modified overlay is the proven choice — Sika/MBS Ucrete or Fosroc Expocrete — installed with coved skirting for a seamless, hygienic, easily cleaned floor. Space Arc can supply the material and apply it; call +91 99991 55255 for a system recommendation.
What is the difference between epoxy and PU-concrete (Ucrete) flooring?
Epoxy gives a hard, chemically resistant, cost-effective floor for general industry and warehousing at around 1–3 mm. PU-concrete (Ucrete) is a thicker (about 4–9 mm) polyurethane cement built for thermal shock, steam, impact and aggressive chemicals in food, beverage and chemical plants. We help you choose based on temperature, chemicals and loading.
Which epoxy flooring product is best for a warehouse with forklift traffic?
For forklift and pallet movement, use a high-build or self-levelling epoxy with good abrasion resistance — for example Fosroc Nitoflor FC150, a Sikafloor system or a MasterTop epoxy — or a dry-shake hardener such as Fosroc Durocrete for a more economical wear surface. The right pick depends on slab condition and budget; our team can advise.
Do you supply anti-static (ESD) industrial flooring?
Yes. We supply and apply static-dissipative and conductive ESD systems including Fosroc Nitoflor Conductive, and the MasterTop and Sikafloor ranges, for electronics, semiconductor, battery and clean-room facilities, designed to meet your target surface-resistance specification.
Who is an authorised distributor for Fosroc, Sika and UltraTech flooring in India?
Space Arc Engineering is an Authorised Project Distributor and Applicator in India for Fosroc, Sika, Master Builders Solutions, MC-Bauchemie, STP, UltraTech and Dr. Fixit. We supply genuine, batch-traceable material with technical and applicator support. Reach us at +91 99991 55255 or [email protected].
What is the price of epoxy or industrial flooring per square metre in India?
Cost depends on system type (coating vs self-levelling vs heavy-duty overlay), thickness, substrate preparation and area. Thin-film epoxy is the most economical; PU-concrete and ESD systems cost more. Share your drawings and conditions with Space Arc for an accurate project quote covering material and application.
Can you re-level or repair a damaged concrete slab before applying the floor?
Yes. We assess the substrate and use repair mortars or high-strength cementitious toppings/screeds such as UltraTech Floorkrete HS grades to level and strengthen the slab, then apply the chosen epoxy or PU system once it has cured and moisture levels are acceptable.
Do you provide application/installation, or only supply material?
Both. As an authorised applicator we offer surface preparation (grinding, shot-blasting, moisture testing), primer and system build-up, trained laying crews, joint treatment and hygienic coving — alongside genuine material supply and method statements — for projects across India.
Stop guessing at your floor spec. Get the right system, applied right.
Share your loading, chemical exposure and hygiene requirements and our team will recommend the correct system with a clear, project-wise quote, material and application included.