Master Builders Solutions MB Life series (waterproofing admixtures)
Integral crystalline admixtures that waterproof concrete from the inside out – no membrane, no primer, no separate application step.
What is it?
Crystalline capillary waterproofing admixtures – marketed by Master Builders Solutions globally as the MasterLife 300 series (300C, 300D, 300L), referred to here as the MB Life series – dosed into the concrete mix at batching, so waterproofing becomes part of the concrete rather than a coating applied after.
Where is it used?
Basements, raft foundations, retaining/diaphragm walls, water tanks (UGT/OHT), STP/ETP tankage, lift pits, tunnels, metro box structures and pools – any RCC element resisting water from either face, including the negative-side pressure common in Delhi NCR’s high water-table basements.
Why use it?
It removes the biggest failure mode of surface waterproofing – punctured membranes, bad lap joints, delamination around congested rebar. The crystalline structure keeps resealing hairline shrinkage cracks as long as the concrete stays in contact with moisture, so protection doesn’t expire the way a membrane’s service life does.
How is it applied?
Added integrally at the RMC plant or site mixer with the rest of the ingredients – powder for 300C/300D, liquid for 300L – dispensed like any other admixture, with no separate waterproofing crew and no dependency on an accessible surface after the pour.
About Master Builders Solutions MB Life series (waterproofing admixtures)
The MB Life series is Space Arc’s shorthand for the waterproofing sub-range within Master Builders Solutions’ MasterLife durability family, built on crystalline capillary technology. Unlike a membrane on hardened concrete, this admixture goes in with the batch – a catalyst reacts with moisture and unhydrated cement to grow insoluble crystals inside the capillary pore network, blocking water’s path while leaving the concrete free to breathe. The three forms – 300C (concentrated powder), 300D (powder) and 300L (liquid) – suit different batching setups, and all meet ASTM C494/C494M as a Type S admixture.
This matters most on below-grade RCC poured continuously and then made inaccessible – basement rafts, UGTs cast before backfilling, tunnel segments a crew can’t revisit. Space Arc specifies this range mainly through RMC partners for basement and water-tank pours across Delhi NCR and pan-India sites, working alongside – not instead of – waterstops at joints and correctly detailed penetrations. It isn’t a fix for bad detailing; it makes the concrete itself part of the waterproofing system.
The technical insight
The mechanism worth understanding: this chemistry doesn’t create a static barrier the way a hydrophobic pore-blocker does – it triggers crystal growth that reactivates whenever concrete is re-exposed to moisture. That’s the difference from a conventional plasticizing waterproofer like Conplast WP400, which reduces capillary absorption at casting and then stays static: a true crystalline system keeps sealing new cracks that open months later. That self-healing property is why specifiers pay a premium for it on critical below-grade work, and why it can’t be judged on first-cast performance alone.
Where it is used
- Basement rafts and foundation slabs in high water-table zones
- Retaining and diaphragm walls below grade
- Underground and overhead water-retaining tanks
- STP/ETP tankage
- Lift pits, sumps and basement box structures
- Tunnels and underground metro box structures
- Swimming pools and water features
- Precast elements needing long-term water resistance
Key advantages
- No separate waterproofing crew – dosed at batching, compressing schedule
- Ongoing self-sealing of hairline cracks when moisture retriggers crystal growth
- Rated for positive-side and negative-side hydrostatic pressure
- No membrane to puncture or lap-join badly around rebar
- Concrete stays vapour-permeable, unlike a sealed membrane surface
- Protection tied to the concrete’s service life, not a coating’s UV life
- ASTM C494/C494M Type S certified at correct dosage
- Less reliance on skilled surface-applicator labour
Limitations & considerations
- Waterproofs the concrete mass only – joints and penetrations still need waterstops
- Preventive, not a repair product – won’t fix an already-leaking structure
- Needs accurate RMC dosing control; site-batched mixes risk under-dosing
- Doesn’t remove the need for damp-proofing/vapour-barrier decisions at design stage
- Adds cost to every cubic metre poured – awkward to retrofit mid-pour
- Self-healing/pressure figures are manufacturer data; a project trial mix is worth insisting on
Selection & best practice
Run a trial mix with your RMC supplier before locking dosage in, confirming workability, setting time and strength at the actual project dose. Keep waterstops at every joint and penetration regardless of the admixture – it protects the concrete mass, not the joint. Where chloride exposure also threatens reinforcement, pair it with a MasterLife corrosion inhibitor, and treat curing as non-negotiable since the crystalline reaction needs moisture to activate.
Specifications
| Chemistry/System | Integral crystalline capillary waterproofing admixture |
| Product forms | 300C concentrated powder; 300D powder; 300L liquid |
| Standard compliance | ASTM C494/C494M – Type S (Specific Performance) |
| Hydrostatic resistance | Positive-side and negative-side (reverse) pressure |
| Crack-sealing behaviour | Ongoing crystalline regrowth on re-exposure to moisture |
| Vapour permeability | Concrete remains breathable; liquid water is blocked |
| Dosing point | Integral, batched at the RMC plant or site mixer |
| Typical exposure class | Below-grade and water-retaining structures |
Industry use cases
Residential basements, Delhi NCR
High water-table basements across South/West Delhi, Gurugram and Noida where negative-side seepage appears post-monsoon; RMC dosing avoids depending on a membrane crew inside a congested box.
Underground tanks and STP/ETP
Tankage backfilled soon after casting, where a torn membrane would be effectively unfixable without excavation.
Metro and tunnel infrastructure
Below-grade box structures cast continuously, where crystalline admixtures are increasingly specified as a redundant layer alongside membranes.
Institutional/commercial basements
Multi-level parking under hospitals, malls and towers, where a later waterproofing repair is commercially expensive.
Swimming pools
Cast-in-place shells needing long-term water retention without a liner requiring periodic replacement.
Frequently asked questions
Does the MB Life series replace membrane waterproofing entirely?
Can it be dosed on site, or only at the RMC plant?
Will this fix a basement that is already leaking?
Does it affect setting time or final strength?
How is this different from a basic waterproofer like Conplast WP400?
What pack sizes and dosage rates does Space Arc supply?
How we position Master Builders Solutions MB Life series (waterproofing admixtures)
Within Master Builders Solutions’ range, the MB Life series pairs with MasterGlenium superplasticizers on the same pour, MasterLife CI corrosion inhibitors where chloride exposure adds risk, and MasterKure curing compounds since the crystalline reaction depends on curing moisture. Where a surface layer is also wanted, Space Arc adds MasterSeal coatings at critical details rather than relying on the admixture alone. Against other brands, Fosroc’s Conplast WP400 is a genuine Indian-market alternative – a pore-blocking plasticizing waterproofer rather than a self-healing crystalline system; a specifier might choose it on smaller, budget-sensitive structures where basic absorption reduction is enough.
Fosroc Conplast WP400 — A specifier might choose Conplast WP400’s pore-blocking plasticizing chemistry over the self-healing MB Life series on smaller, budget-sensitive or non-critical structures where basic reduction in water absorption is enough.
Related Waterproofing products
Source Master Builders Solutions MB Life series (waterproofing admixtures) for your project
Authorised distribution, technical advice & professional application across Delhi NCR and Pan-India.