About STP ShaliCryl TC 100 ES

ShaliCryl TC 100 ES is STP’s exterior-grade topcoat for its ShaliCryl 215 elastomeric waterproofing system, engineered specifically to sit on top of that base coat and absorb the UV, monsoon runoff and dust that an exposed terrace or wall takes year after year. It is a single-component, silicone-modified acrylic emulsion, meaning the same flexible polymer backbone that gives ShaliCryl 215 its stretch and crack-bridging carries through into the topcoat, boosted with silicone chemistry that pushes water off the surface in the classic lotus-leaf pattern instead of letting it sit and drag dirt into the film. Per STP’s own ASTM D-6083 testing, the cured film holds 550 ± 50% elongation and comes through 1,500 hours of accelerated UV weathering with no reported defects — in practical site terms, a topcoat that resists chalking, cracking and dulling for far longer than an unprotected elastomeric base coat left exposed on its own.

For a distributor and applicator like Space Arc, TC 100 ES earns its place on the shortlist because it solves a problem site engineers see constantly: a perfectly sound ShaliCryl 215 waterproofing job that starts looking tired within eighteen to twenty-four months purely from UV exposure and dust pickup on an exposed roof, even while the waterproofing itself is still doing its job underneath. Recoating with TC 100 ES resets the surface without touching the membrane below it, at a fraction of the cost and downtime of redoing the waterproofing. It is deliberately not positioned as a standalone waterproofing product — STP sells it as a two-coat maintenance and protection layer over a properly prepared ShaliCryl 215 base — and its value shows up over the following several years as the roof or wall holds its water repellency, resists algae streaking, and stays easy to clean rather than needing another full recoat.

The technical insight

The chemistry that makes TC 100 ES worth specifying is the silicone modification grafted onto an acrylic emulsion backbone. The acrylic component carries over the flexibility of the ShaliCryl 215 system beneath it — STP’s ASTM D 6083 testing shows 550 ± 50% elongation and 1.20 ± 0.1 MPa tensile strength at 14 days, which is why the topcoat can move with the substrate and close hairline cracking up to 2 mm rather than sitting rigid and splitting. The silicone portion does a different job: it lowers the surface energy of the cured film so water beads and rolls off (STP calls this the lotus-leaf effect) instead of wetting the surface and dragging airborne dust into it, which is what actually causes the grey, streaky look most plain acrylic coatings develop within a couple of Indian summers. At 60 ± 2% volume solids and a specified dry film thickness of 100-120 microns, the film is thick enough to survive 1,500 hours of accelerated QUV weathering (ASTM D 4586) with no reported defects — a genuinely demanding test that correlates reasonably well with several years of rooftop sun exposure. Adhesion strength of 1.6-2.0 MPa (ASTM D 4541) onto the ShaliCryl 215 base coat is what keeps the two-layer system acting as one film rather than delaminating under thermal cycling, which is the usual failure mode when a mismatched topcoat is forced onto an elastomeric base it wasn’t designed for.

Where it is used

• UV-protective topcoat over ShaliCryl 215 waterproofing on exposed RCC terraces and roof slabs
• Parapet walls and terrace boundary walls that take direct monsoon rain and sun
• Podium decks and terrace garden waterproofing systems needing a durable wear surface
• Exterior walls of overhead water tanks and elevated tanks finished with ShaliCryl 215
• Industrial shed and warehouse RCC roofs in high-UV or coastal-humidity locations
• Refresh recoating of aged ShaliCryl 215 systems to extend service life without redoing the waterproofing
• Institutional and commercial building facades where algae streaking and dirt pickup are recurring maintenance complaints
• Any ShaliCryl 215 application where the specifier wants a glossy, easy-clean finished look rather than a bare elastomeric surface

Key advantages

• Passed 1,500 hours of accelerated UV weathering (ASTM D 4586) with no defects reported
• High crack-bridging ability up to 2 mm from 550% elongation, so it moves with hairline movement in the base coat
• Lotus-leaf water repellency reduces standing water and dirt/stain pickup on the finished surface
• Single-component, ready-to-use emulsion — no on-site mixing ratios to get wrong
• Breathable yet impermeable film that lets vapour escape without letting liquid water in, reducing blistering risk
• Fast surface-dry time of about 10 minutes limits the window for dust contamination during application
• Extends the working life of the ShaliCryl 215 base coat, usually cheaper than a full waterproofing redo
• Glossy, easy-to-clean finish that holds its look better than an unprotected elastomeric base coat alone

Limitations & considerations

• Not a standalone waterproofing membrane — it is designed and tested specifically as a topcoat over ShaliCryl 215, not a substitute for it
• Minimum application temperature is above 5°C, ruling out early-morning application on cold north-Indian winter mornings
• Needs a full 72-hour cure before foot traffic or further work, which requires schedule discipline on active sites
• Supplied in white base and needs STP’s accompanying tinting paste for colour, so shade consistency depends on correct paste dosing across batches
• Performance depends entirely on a sound, properly cured ShaliCryl 215 substrate underneath — it will not fix an already-failing base coat
• Hitting the specified 100-120 micron DFT depends on applicators actually achieving the 160-200 ml/m² plus 140 ml/m² dosage; under-application shortens the UV-resistant life materially

Selection & best practice

Specifications

Industry use cases

How we position STP ShaliCryl TC 100 ES

ShaliCryl TC 100 ES is the paired topcoat for STP’s ShaliCryl 215 elastomeric waterproofing coating — the two are meant to be specified and bought together, and Space Arc stocks both as a system rather than as standalone items. Within STP’s own ShaliCryl range, buyers comparing options should also look at ShaliCryl LM and ShaliCryl LM HI, which sit at a different point in the acrylic waterproofing line-up for liquid-membrane applications rather than as a UV topcoat. Outside the STP range, the closest genuine equivalent is Fosroc’s Nitocote Wallguard, a single-coat, water-based acrylic elastomeric wall coating that combines waterproofing and decorative UV protection in one product rather than STP’s base-coat-plus-topcoat approach — a specifier who wants a simpler one-product system on a straightforward exterior wall, without the crack-bridging demands of a full terrace waterproofing build-up, may lean toward the Fosroc route instead.

Related Waterproofing products

View all Waterproofing products →