Dr. Fixit Roofseal Polyplus
Single-Component Polyurethane Liquid Waterproofing Membrane for Flat Roofs and Terraces
Authorized Project Distributor — Dr. Fixit by Pidilite | Space Arc Engineering, Ghaziabad
Product Overview
Dr. Fixit Roofseal Polyplus is a premium, single-component, moisture-curing polyurethane (PU) liquid waterproofing membrane from Pidilite Industries designed for the waterproofing of flat concrete roofs, accessible and inaccessible terraces, podium slabs, and balconies in Indian buildings. It is supplied as a ready-to-use liquid that is applied directly to the prepared concrete substrate by brush, roller, or squeegee without requiring heating, mixing of components, or special equipment. Roofseal Polyplus cures by reaction with atmospheric moisture to form a continuous, seamless, elastic polyurethane membrane that covers the entire roof surface including all complex details such as parapet wall upstands, pipe penetrations, roof drain surrounds, movement joint covers, and service conduit crossings — areas that are notoriously difficult to waterproof reliably with sheet membrane systems. The cured polyurethane membrane is highly elastic (elongation at break typically above 300 percent) enabling it to accommodate the significant thermal movement of a concrete roof slab in Indian conditions — a flat concrete roof in Delhi NCR can experience temperatures from below 5 degrees C in January to above 60 degrees C surface temperature in June, creating substantial thermal expansion and contraction cycling that cracks rigid coatings but is comfortably accommodated by the elastic PU membrane. Roofseal Polyplus is UV-stable and formulated to resist the intense ultraviolet radiation and ozone exposure at roof level in Indian conditions, maintaining its physical properties and waterproofing performance over an extended service life without premature chalking, embrittlement, or crack formation. It is available in a range of colours including grey, terra cotta, and offwhite. Space Arc Engineering supplies Dr. Fixit Roofseal Polyplus for residential, commercial, and industrial building terrace and roof waterproofing projects throughout Delhi NCR and Uttar Pradesh.
Applications
- Flat concrete roof and terrace waterproofing — new construction and renovation of leaking roofs
- Podium and landscaped deck waterproofing in multi-storey buildings
- Balcony and canopy slab waterproofing — small areas with complex geometric detail
- Parapet wall top and interior face waterproofing
- Industrial building roof waterproofing where foot traffic access is restricted
- Roof garden and green roof waterproofing layer under protection screed and growing medium
Key Advantages
- Seamless liquid-applied membrane — covers all details including pipe penetrations and corners without seams
- Single-component — no mixing, no heating, ready to use from bucket with brush or roller
- High elasticity above 300 percent elongation — accommodates thermal movement and minor cracking
- UV-stable formulation — resists degradation under intense Indian summer roof-level UV
- Solvent-free or low-solvent formulation — reduced VOC during application
- Can be reinforced with polyester fleece at cracks and joints for enhanced performance
Technical Data
| Type | Single-component moisture-curing polyurethane liquid waterproofing membrane |
| Elongation at Break | Typically above 300 percent (cured film) |
| Tensile Strength | Typically above 1.5 MPa (cured film) |
| Application | Brush, roller, or squeegee — 2 to 3 coats at specified coverage rate |
| Total DFT | Minimum 1.0 to 1.5 mm DFT (2 to 3 coats) |
| Service Temperature | -20 degrees C to +80 degrees C (cured membrane) |
Get a Quote
+91 9999155255 | info@space-arc.com | Space Arc Engineering, Sahibabad, Ghaziabad
Frequently Asked Questions
How should Dr. Fixit Roofseal Polyplus be applied on a flat concrete terrace with existing hairline cracks and what coverage rate is needed for a reliable waterproof membrane?
Application of Dr. Fixit Roofseal Polyplus on a flat concrete terrace with existing hairline cracks requires careful surface preparation and a minimum three-coat application to achieve a reliable waterproof membrane. The procedure is: Surface preparation: sweep and clean the roof surface thoroughly. Remove all loose concrete, damaged screed, efflorescence, algae, and organic contamination. Fill active cracks (cracks that open and close with temperature) wider than approximately 0.5 mm with a polyurethane crack sealant or Dr. Fixit crack filler, allowing to cure before Roofseal Polyplus application. All pipe penetrations and drain outlets must be cleaned and any loose fittings re-secured before waterproofing. Prime: apply Dr. Fixit Roof Primer by brush or roller at the specified rate to the clean, dry concrete surface. Allow the primer to dry and become tack-free before applying Roofseal Polyplus. Coat 1 — base coat: apply Roofseal Polyplus by brush or roller at a coverage of approximately 0.5 to 0.6 kg per m2 (providing approximately 0.5 mm DFT). At all hairline cracks, pipe penetrations, drain surrounds, and parapet wall-to-roof junctions, embed a strip of Dr. Fixit polyester fleece mesh (100 to 150 mm wide) into the wet Coat 1 and work it flat with a brush. Allow Coat 1 to cure until touch-dry (approximately 4 to 6 hours at 30 degrees C and 60 percent RH). Coat 2 — intermediate coat: apply a second coat at 0.5 to 0.6 kg per m2, covering the full roof area including fleece-reinforced strips. Allow to cure. Coat 3 — finish coat: apply the third and final coat at 0.3 to 0.4 kg per m2, extending the membrane up parapet walls to a minimum height of 300 mm. Total dry film thickness should be a minimum of 1.0 to 1.5 mm over three coats. Total material consumption approximately 1.3 to 1.6 kg per m2.
Source Dr. Fixit Roofseal Polyplus for Your Project
Space Arc Engineering is an Authorized Project Distributor for Dr. Fixit by Pidilite Industries serving Delhi NCR, Ghaziabad, Noida and Uttar Pradesh.
Get Dr. Fixit Roofseal Polyplus — Single-Component Polyurethane Liquid Waterproofing Membrane for Flat Roofs and Terraces — pricing, TDS & technical help
Space Arc Engineering is an authorized Dr. Fixit distributor & applicator in Delhi NCR & pan-India. Fast quotes, datasheets and on-site support.
Get a Quote on WhatsAppRequest TDS on WhatsApp