SIKA · AUTHORIZED PROJECT DISTRIBUTOR · SPACE ARC ENGINEERING
SikaCeram®-935 Floor Leveler Primer
Water-based bond-promoting primer for use before levellers and tile adhesives
Product Overview
SikaCeram-935 Floor Leveler Primer is a single-component, water-based synthetic resin concentrate used to prepare cementitious substrates before levelling compounds or tile adhesives are applied. Brushed or rolled onto the floor after dilution, it penetrates and seals the surface, reducing absorbency, binding fine dust and creating a uniform, adhesion-ready base. On smooth or dense surfaces it markedly improves the grip of the following layer, while on absorbent screeds it prevents water being drawn too quickly out of levellers, helping them flow and cure correctly. It is solvent-free and low odour, making it convenient for interior fit-outs. Space Arc Engineering, an authorized Sika distributor in India, supplies SikaCeram-935 Floor Leveler Primer with SikaCeram levellers and adhesives for a coordinated tiling system.
Features & Benefits
- Controls substrate absorbency so levellers and adhesives flow and cure as intended
- Improves bond on smooth and dense surfaces where adhesion is otherwise weak
- Binds residual dust to leave a clean, consolidated base for the next layer
- Water-based and solvent-free for low odour and easy interior application
- Diluted 1:1 with water for economical, easy-to-control coverage
- Compatible with SikaCeram levellers and tile adhesives for a unified system
Technical Highlights
| Coverage | Approximately 150 to 200 g/m² per coat of the diluted primer; theoretical figure that excludes porosity and wastage, so refer to TDS and trials. |
| Strength | Acts as a bonding bridge that develops the adhesion of the following layer rather than providing strength itself; refer to TDS. |
| Performance | On cementitious screeds or concrete a single coat dries in about 20 minutes minimum, while calcium sulphate (anhydrite) screeds need about 24 hours before overlaying. |
| Application Conditions | Apply at ambient and substrate temperatures of about +10 degrees C to +35 degrees C; refer to TDS. |
| Packaging | Supplied in 5 kg containers; dilute 1:1 with water by weight or volume before use. |
Applications
- Priming residential cement screeds before SikaCeram-488 levelling and tiling
- Sealing dense, smooth concrete floors in offices to improve adhesive grip
- Treating absorbent screeds in hotels and apartments ahead of self-levelling underlayment
- Preparing anhydrite screeds before tile adhesives in dry interior areas
- Dust-binding and bond promotion in retail and commercial tiling fit-outs
SPACE ARC ENGINEERING · AUTHORIZED DISTRIBUTOR
Product image & sample available on request
Technical Data
| Type | Water-based synthetic resin primer (1-part) |
| Base | Synthetic resin, water-based, solvent-free |
| Dilution | 1:1 with water |
| Coverage | About 150 to 200 g/m² per coat (diluted) |
| Overcoat | About 20 min on cement; about 24 h on anhydrite |
| Pack size | 5 kg container |
Datasheet & Documents
Request the Technical Data Sheet, method statement and safety data sheet from Space Arc Engineering.
Request Quote / Availability
+91 9999155255
+91 7290089007
info@space-arc.com
Frequently Asked Questions
What does SikaCeram-935 Floor Leveler Primer do?
It is a water-based primer that reduces substrate absorbency, binds dust and improves the bond of the levelling compound or tile adhesive applied over it, while also helping protect the substrate from moisture in the overlay.
How is SikaCeram-935 diluted and applied?
The concentrate is mixed 1:1 with water by weight or volume and then applied by brush or roller to the prepared substrate, usually in a single coat. Very absorbent surfaces may need a second coat; refer to the TDS.
How long must SikaCeram-935 dry before levelling or tiling?
On cementitious screeds or concrete it typically dries in about 20 minutes before overlaying, whereas calcium sulphate (anhydrite) screeds generally need around 24 hours. Drying depends on temperature and porosity; refer to the TDS.
Which substrates suit SikaCeram-935 primer?
It is suitable for concrete, cementitious screeds and calcium sulphate (anhydrite) screeds. It is used before SikaCeram-488 Floor Leveler or SikaCeram tile adhesives to improve adhesion and control absorption.
Who supplies SikaCeram-935 Floor Leveler Primer in India?
Space Arc Engineering is an authorized Sika distributor in India and supplies SikaCeram-935 Floor Leveler Primer with matching levellers and adhesives. Contact +91 9999155255 or info@space-arc.com for pricing and quantities.
Related Products
- SikaCeram®-488 Floor Leveler — Self-levelling compound applied over the primed substrate
- SikaCeram®-638 Colour Grout Super — Coloured cement grout to finish the tiled joints
- SikaCeram®-850 Design — Epoxy grout for stain-resistant joints in demanding areas
- Sikafloor-80 EpoCem Primer — Epoxy-cement primer where a higher-performance bridge is required
Buy SikaCeram®-935 Floor Leveler Primer — Sika Distributor in India
Space Arc Engineering is an Authorized Project Distributor supplying Sika products for infrastructure, industrial, commercial and residential projects across India.
+91 9999155255 | +91 7290089007 | info@space-arc.com
Related tile adhesives & grouts products
Other tile adhesives & grouts systems we supply & apply across Delhi NCR and pan-India.