SIKA · AUTHORIZED PROJECT DISTRIBUTOR · SPACE ARC ENGINEERING
SikaShield P24 S IN 3 mm
3 mm torch-applied APP-modified bituminous membrane with sand finish
Product Overview
SikaShield P24 S IN 3 mm is a 3 mm torch-applied waterproofing membrane based on APP-modified bitumen, reinforced with a non-woven polyester carrier and finished with a sand surface. The underside carries a burn-off film that melts during torching to bond the sheet fully to the prepared substrate, creating a continuous, durable waterproof layer that can also serve as a top sheet in multi-layer systems. Its polyester reinforcement gives strong mechanical properties, long-term flexibility and good abrasion resistance. Typical uses include balconies, terraces, flat and sloping roofs, car-park and bridge decks, underpasses and basements. Space Arc Engineering, an authorized Sika distributor in India, supplies this membrane with technical support for infrastructure, industrial, commercial and residential projects.
Features & Benefits
- Torch-bonded for a fully adhered, continuous waterproof layer
- APP modification gives long-term flexibility and heat stability
- Non-woven polyester carrier provides high tensile and tear strength
- Sand finish improves abrasion resistance and overlay adhesion
- Low water absorption supports durable, watertight performance
- Suits both single-layer and multi-layer build-ups as a top sheet
Technical Highlights
| Coverage | Supplied in 1.0 m x 10.0 m rolls on cardboard coils; allow for laps and overlaps per the TDS. |
| Strength | Longitudinal tensile (650 +/- 150) N/50mm and transversal (450 +/- 150) N/50mm. |
| Performance | Tear strength up to (300 +/- 100) N longitudinal with elongation around (40 +/- 10) % both ways. |
| Application Conditions | Apply at +10 C to +40 C ambient and substrate, with substrate moisture content below 6%. |
| Packaging | APP-modified bituminous membrane, 3 mm thick (+0.3 / -0.2 mm), polyester reinforced. |
Applications
- Flat and sloping roof waterproofing on commercial buildings
- Bridge decks and underpasses in infrastructure projects
- Multi-storey car-park deck waterproofing
- Industrial terraces and exposed concrete slabs
- Residential balconies and terrace floors
SPACE ARC ENGINEERING · AUTHORIZED DISTRIBUTOR
Product image & sample available on request
Technical Data
| Type | Torch-applied APP-modified bituminous membrane |
| Base | APP bitumen, non-woven polyester reinforcement |
| Thickness | 3 mm (+0.3 / -0.2 mm) |
| Tensile | 650 +/- 150 N/50mm (long.) |
| Roll size | 1.0 m x 10.0 m |
| Application temp. | +10 C to +40 C |
Datasheet & Documents
Request the Technical Data Sheet, method statement and safety data sheet from Space Arc Engineering.
Request Quote / Availability
+91 9999155255
+91 7290089007
info@space-arc.com
Frequently Asked Questions
How is SikaShield P24 S IN 3 mm applied?
It is torch-applied: the burn-off film on the underside is melted with a flame to fully bond the membrane to a prepared substrate, forming a continuous waterproof layer.
Where can this membrane be used?
It is suited to balconies, terraces, flat and sloping roofs, car-park and bridge decks, underpasses, basements and concrete slabs, including as a top sheet in multi-layer systems.
What substrate moisture is acceptable?
The substrate should have a moisture content below 6%, and application should be carried out between +10 C and +40 C. Refer to the TDS for full preparation requirements.
What reinforcement does it use?
It is reinforced with a non-woven polyester carrier, which provides high tensile strength, tear resistance and dimensional stability.
Who distributes SikaShield P24 S IN 3 mm in India?
Space Arc Engineering is an authorized Sika distributor in India. Reach the team at +91 9999155255 or info@space-arc.com for quotes and technical guidance.
Related Products
- SikaShield P24 MG IN 3 mm — Mineral-finished 3 mm APP membrane for exposed roof applications.
- SikaShield P35 MG IN 4 mm — Heavier 4 mm mineral-finished membrane for tougher exposures.
- SikaShield Primer S-30 IN — Solvent-based bituminous primer for torch-applied membranes.
- SikaShield E50 HDPE SA IN 1,5 mm — Cold self-adhesive alternative where flames are not permitted.
Buy SikaShield P24 S IN 3 mm — Sika Distributor in India
Space Arc Engineering is an Authorized Project Distributor supplying Sika products for infrastructure, industrial, commercial and residential projects across India.
+91 9999155255 | +91 7290089007 | info@space-arc.com