Sika MonoTop-3400 Abraroc
High Abrasion Resistant Repair Mortar for Industrial Floors
Authorized Project Distributor — Sika India | Space Arc Engineering, Ghaziabad
Product Overview
Sika MonoTop-3400 Abraroc is a single-component, factory pre-blended cementitious repair mortar incorporating hard aggregate fillers to produce exceptional abrasion resistance in the cured state. It is specifically formulated for repair and resurfacing of industrial concrete floors, hydraulic spillways, dam aprons, pump sumps, and any concrete surface subject to heavy mechanical wear, fluid erosion, or abrasive traffic. The name Abraroc derives from its ability to resist abrasion (Abra) as effectively as rock (Roc). Applied in layers of 10–50 mm, it restores worn concrete surfaces to a flat, durable finish that resists continued abrasion far better than plain concrete repair mortars. Space Arc Engineering distributes Sika MonoTop-3400 Abraroc for industrial floor refurbishment, dam repair, and hydraulic infrastructure projects across Delhi NCR and Northern India.
Applications
- Repair of worn industrial concrete floor surfaces
- Hydraulic spillway and dam apron abrasion repair
- Pump sump and pipe invert repair against flow erosion
- Grinding and wear-damaged factory floor resurfacing
- Port and terminal floor repair under heavy forklift traffic
- Abrasion-resistant topping over structural repair areas
Key Advantages
- Ultra-high abrasion resistance — hard aggregate filled formula
- Single-component — just add water for consistent performance
- Excellent adhesion to prepared concrete substrate
- Applied 10–50 mm in one lift — no special staging needed
- Superior to plain concrete in resistance to abrasion and impact
- Rapid strength gain allows quick return to service
Technical Data
| Type | Abrasion resistant single-component cementitious mortar |
| Abrasion Resistance | Very high (hard aggregate filled) |
| Application Thickness | 10–50 mm per lift |
| Compressive Strength 28d | > 50 MPa |
| Bond Strength | > 1.5 MPa pull-off |
| Pack Size | 25 kg bags |
Get a Quote
📞 +91 9999155255
📧 info@space-arc.com
🏢 Space Arc Engineering, Sahibabad, Ghaziabad
Frequently Asked Questions
What makes Sika MonoTop-3400 Abraroc more abrasion resistant than standard repair mortars?
MonoTop-3400 Abraroc incorporates specially selected hard mineral aggregates such as quartz, corundum, or basalt in the dry pre-blend. These hard aggregates resist the grinding action of traffic and flowing water far better than normal sand or cement matrix alone, resulting in dramatically reduced surface wear rates.
Can Sika MonoTop-3400 Abraroc be used in hydraulic environments with flowing water?
Yes. Sika MonoTop-3400 Abraroc is designed for hydraulic structures subject to flowing water abrasion, such as spillways, stilling basins, and pipe inverts. Its dense, hard surface resists the erosive action of water-borne sediment and flow velocity.
Does Sika MonoTop-3400 Abraroc need a primer before application?
Yes. A bonding agent such as SikaLatex Super or Sikadur-32 LP IN epoxy bonding primer should be applied to the prepared concrete substrate before placing MonoTop-3400 Abraroc, to ensure maximum adhesion and prevent delamination under traffic loading.
Source Sika MonoTop-3400 Abraroc for Your Project
Space Arc Engineering is an Authorized Project Distributor for Sika India serving Delhi NCR, Ghaziabad, Noida and Uttar Pradesh.