About Fosroc Nitocote Nano AG

Fosroc Nitocote Nano AG is a protective coating from the Nitocote range, engineered specifically as an anti-graffiti barrier for vertical surfaces in busy public environments. Where conventional decorative paints simply provide colour, Nano AG is a functional coating: it forms a tight, low-energy surface film using nanotechnology so that spray paint, marker ink and posters do not key into or stain the wall. When a surface is defaced, the graffiti can be lifted with warm water and a stiff brush – and routine grime washed off by water jetting – without aggressive solvents or a full repaint.

Beyond graffiti resistance, the coating does double duty as a durability layer for the concrete or masonry beneath it. Fosroc lists it as an effective anti-carbonation barrier that resists carbon dioxide diffusion – the mechanism that lowers concrete alkalinity over years and eventually triggers embedded-steel corrosion. It is also UV resistant and water repellent, so the treated facade weathers more slowly, stays cleaner and resists wind-driven rain. The pigments are lightfast, non-lead, and offered in a range of colours, making it suitable for architectural facades where appearance matters as much as protection.

For Indian conditions – intense sun, monsoon-driven moisture, dense urban pollution and a high incidence of bills, posters and vandalism on public infrastructure – this combination of anti-graffiti release, anti-carbonation and water repellence in a single coating is genuinely useful. It targets a real maintenance pain point: the recurring cost of repainting metro stations, flyover piers, school compound walls and high-rise elevations. Space Arc Engineering supplies and applies Nitocote Nano AG as an authorised Fosroc distributor and applicator across Delhi NCR and pan-India, with site-specific specification support.

The technical insight

The defining technology here is the nano-engineered surface. By building the cured film around nanoscale chemistry, Fosroc achieves a very low surface energy and a tight, hydrophobic skin. Graffiti media need micro-porosity and surface “tooth” to anchor; the Nano AG film denies them both, so paint and ink sit on top rather than penetrating, and release cleanly with warm water and mechanical agitation. The same dense film is what delivers anti-carbonation performance: a low-permeability barrier slows the inward diffusion of CO2 (and chloride-bearing moisture), helping preserve the concrete’s protective alkalinity around the reinforcement and extending service life. Crucially, an anti-carbonation coating must still let the substrate breathe to water vapour while blocking CO2 and liquid water – a balance of permeability that distinguishes purpose-built protective coatings from ordinary exterior emulsions. Performance on site is governed less by the product alone and more by the system: substrate soundness, cleanliness, the correct compatible primer, specified number of coats and an even, continuous dry film. Because published numeric data (coverage, DFT, cure) varies by colour, substrate porosity and Fosroc’s region-specific datasheet, the project TDS should always be the source of record for application figures.

Where it is used

• Anti-graffiti protection of metro, railway and bus-terminal walls, subways and pedestrian underpasses
• Anti-carbonation and weather protection of high-rise residential and commercial facades
• Protective coating for multi-level and basement car park walls and columns
• Compound walls, boundary walls and elevations of schools, colleges and hospitals
• Public-realm and civic infrastructure – flyover piers, retaining walls, government buildings
• Architectural concrete and plastered masonry elevations exposed to UV, pollution and vandalism

Key advantages

• Easy graffiti removal – paint, ink and posters lift off with warm water and a stiff brush, avoiding repaints
• Acts as an anti-carbonation barrier, resisting CO2 diffusion to help protect embedded reinforcement
• UV resistant and water repellent, so facades weather and soil more slowly
• Lightfast, non-lead pigments available in a wide range of attractive colours
• Routine cleaning by water jetting removes suspended dust and atmospheric grime
• Low whole-life maintenance cost versus conventional emulsion paint on high-traffic walls
• Suitable for concrete, plaster and hard masonry walls – broad substrate compatibility
• Backed by Fosroc’s protective-coatings system support and Space Arc’s application expertise

Limitations & considerations

• Designed for vertical wall surfaces, not for trafficked floors or horizontal wear decks
• Performance depends on correct surface preparation, a compatible primer and the specified coat build – it is a system, not a single-product fix
• Published numeric data (coverage, DFT, cure times) is region- and colour-dependent; always confirm against the current project-specific Fosroc TDS
• Not a structural repair or crack-bridging waterproofing membrane – pair with the appropriate Fosroc Renderoc / Nitocote system for those needs
• On porous or heavily contaminated substrates, additional preparation and primer coats may be required
• Application should follow Fosroc’s temperature, humidity and overcoat-window guidance for a continuous, defect-free film

Selection & best practice

Specifications

Industry use cases

How we position Fosroc Nitocote Nano AG

Within Fosroc’s own range, Nitocote Nano AG sits alongside Nitocote AG (a silicone-elastomer, non-sacrificial anti-graffiti coating) and Nitocote Wallguard, but distinguishes itself through its nanotechnology film and combined anti-graffiti plus anti-carbonation function. For pure anti-carbonation or decorative protection without the graffiti requirement, Fosroc’s Dekguard range is the usual specification; for cementitious or epoxy waterproof coatings, the Nitocote CM210 and Nitocote EP/EPU families apply – and Renderoc handles the underlying concrete repair before any coating goes on. Against the wider Indian market, credible alternatives for anti-graffiti and protective wall coatings include Sika (e.g. Sikagard anti-graffiti and anti-carbonation systems), MBCC/Master Builders Solutions (MasterProtect facade coatings), Dr. Fixit (Pidilite) for protective and waterproof coatings, and STP Limited for specialist protective systems. Nano AG’s edge is the specific pairing of easy water-based graffiti release with anti-carbonation protection in one nanotech coating, backed by Fosroc’s system support. For Indian buyers, the practical differentiator is sourcing and execution: Space Arc Engineering supplies genuine Fosroc material and provides authorised application across Delhi NCR and pan-India, ensuring the correct primer, coat build and warranty-grade finish that determine real-world performance.

Related Protective Coatings products

View all Protective Coatings products →