About Asian Paints SmartCare SmartCare Repair Polymer

{

“name”: “SmartCare Repair Polymer”,

“slug”: “smartcare-repair-polymer”,

“brand”: “Asian Paints SmartCare”,

“realProduct”: “yes”,

“officialSource”: “https://static.asianpaints.com/content/dam/professionals/products/pdfs/tds/TDS%20-%20SmartCare%20Repair%20Polymer.pdf”,

“category”: “admixtures”,

“metaTitle”: “SmartCare Repair Polymer | SBR Bonding Agent | Space Arc”,

“metaDescription”: “SmartCare Repair Polymer is an SBR bonding agent and mortar modifier for spalled RCC repair, old-to-new concrete bonding, and basic waterproofing coats.”,

“heroSubtitle”: “An economical SBR bonding and repair polymer for spalled concrete, old-to-new bonding, and basic waterproofing coats, mixed on site with ordinary cement.”,

“glance”: {

“whatIsIt”: “A white, modified SBR (styrene-butadiene rubber) liquid polymer that a mason gauges into OPC cement on site, at one of three ratios, to become a bond coat, a repair-mortar additive, or a basic waterproofing coat.”,

“whereUsed”: “Spalled RCC repair on beams, columns, chajjas and slabs; old-to-new concrete bonding; basement side walls, small terraces, toilet sunken slabs, lift pits and balconies; non-dusting floor toppings.”,

“whyUse”: “One economical drum does three jobs on a repair site, which suits routine RCC repair, society AMC contracts and minor waterproofing far better than carrying a full specification-grade repair mortar system for every patch.”,

“howApplied”: “Hand-gauged with cement at 1:2 for coating, 1:1 for bond coat, or 7% by cement weight for mortar; mixed with a stirrer for 2-3 minutes; brushed on in 1-2 coats and overlaid while still tacky.”

},

“about”: “SmartCare Repair Polymer is Asian Paints’ entry-level SBR (styrene-butadiene rubber) latex, a white liquid that gets gauged into ordinary Portland cement on site, in one of three ratios, to do three different jobs: bond new concrete or plaster to an old substrate, toughen a patch-repair mortar against shrinkage cracking, or lay down a basic two-coat waterproofing slurry. It sits at the practical, repair-and-maintenance end of the SmartCare range rather than the specification end. There’s no published IS, ASTM or BS compliance figure in the datasheet, and the manufacturer’s own literature points dampness and efflorescence jobs to SmartCare DampBlock 2K instead. For the spalled chajjas, corroding balcony edges and old-to-new RCC joints that turn up on almost every Delhi NCR retrofit site, though, it’s a dependable, low-drama product.\n\nOn our sites it behaves exactly as consistently as the surface prep allows, which is really the whole story with any SBR bonding agent. Saw-cutting the repair patch to a clean 10 mm-deep edge, keeping the concrete saturated-surface-dry rather than merely damp, and overlaying the repair mortar while the bond coat is still tacky are the three habits that separate a repair that lasts through several monsoons from one that de-bonds in the first. Because it’s sold in packs as small as 1 litre as well as 20 litre drums, it also works well for scattered repair jobs, balcony-by-balcony chajja repair or society AMC contracts, where a full 2K polymer-modified mortar system for every patch isn’t justified.”,

“technicalInsight”: “Chemically, SmartCare Repair Polymer is a modified SBR dispersion, 40-42% volume solids, specific gravity 1.0-1.1, that film-forms as the water in the mix evaporates and co-polymerises through the curing cement matrix. That’s what gives the classic SBR benefits: a lower effective water-cement ratio, better flexural strength in thin repair mortars, and a mechanical-plus-chemical bond to the old substrate rather than just a mechanical key. It’s worth being precise about what this actually buys you, though: at 1.5-2.0 m2/kg coverage in two brushed coats, the ‘waterproofing coating’ use is a thin preventive slurry, not a membrane. For terraces or podiums that see standing water, specify it as a bond coat under a proper waterproofing system rather than as the waterproofing system itself.”,

“applications”: [

“Repair of spalled concrete on RCC beams, columns, chajjas, balcony slabs and precast members”,

“Bond coat between old and new concrete before re-plastering, extensions or topping repairs”,

“Polymer-modified patch repair mortar (cement:sand 1:3 plus 7% dosage) for renders and screeds”,

“Basic preventive waterproofing coat for basement side walls, small terraces, toilet sunken slabs, lift pits and balconies”,

“Non-dusting floor toppings for utility, storage and light-traffic service floors”,

“Key/primer coat before tiling or stone cladding on vertical masonry, interior and exterior”,

“Shrinkage-crack control additive in general repair mortars on old and new construction”,

“Bonding new screed toppings to old RCC roof slabs ahead of a fresh waterproofing system”

],

“advantages”: [

“One drum covers three jobs, bonding agent, mortar modifier and basic coating, cutting the SKUs a repair crew has to carry”,

“Priced for routine repair and maintenance work rather than specification-grade waterproofing budgets”,

“Simple bucket-and-brush application; no proportioning pumps or special mixing equipment needed”,

“Reduces drying and ageing shrinkage cracks in patch repair mortars”,

“Improves abrasion resistance under rubber-wheeled traffic, useful for service and utility floors”,

“SBR chemistry is familiar to most site masons, so training and supervision overhead stays low”,

“Backed by the Asian Paints dealer network for fast local restocking on ongoing repair or AMC contracts”,

“Small 1 L packs alongside 20 L drums suit scattered, balcony-by-balcony repair work”

],

“limitations”: [

“Not a dampness or efflorescence treatment; the manufacturer’s own literature redirects those jobs to SmartCare DampBlock 2K”,

“The waterproofing ‘coating’ use is a thin two-coat slurry, not a substitute for a proper elastomeric or 2K membrane on terraces exposed to standing water”,

“No IS, ASTM or BS compliance value is published in the datasheet, so it can’t be cited against a numbered-standard tender requirement”,

“Bond coat performance depends on overlaying the repair mortar while it’s still tacky, a site-sequencing dependency that adds coordination risk on larger jobs”,

“Results are highly sensitive to surface preparation (saw-cut edges, SSD condition); skipped prep is the most common cause of de-bonding”,

“12-month shelf life from manufacture, so bulk 20 L drums bought ahead of a large repair programme need stock rotation”

],

“bestPractice”: “Match the dosage to the job rather than defaulting to one ratio for everything: 1:2 by weight with cement for the waterproofing slurry, 1:1 for a bond coat, and 7% by weight of cement (about 3.5 kg per 50 kg bag) for a repair mortar or render. Saw-cut repair patches to a clean square or rectangular profile at least 10 mm deep, wire-brush off all loose material, curing compound and mould oil, and saturate the substrate to a saturated-surface-dry condition before priming. Mix with a mechanical stirrer for 2-3 minutes to keep air entrapment out, apply by brush, and overlay repair mortar or a protective screed while the coat is still tacky, recoating if it dries first.”,

“specs”: [

{ “property”: “Chemistry / Type”, “value”: “Modified SBR (Styrene-Butadiene Rubber) dispersion” },

{ “property”: “Form / Appearance”, “value”: “White liquid” },

{ “property”: “Volume Solids”, “value”: “40-42%” },

{ “property”: “Specific Gravity”, “value”: “1.0 – 1.1” },

{ “property”: “Dosage – Waterproofing coating”, “value”: “1:2 by weight (Repair Polymer : Cement)” },

{ “property”: “Dosage – Bonding agent”, “value”: “1:1 by weight (Repair Polymer : Cement)” },

{ “property”: “Dosage – Mortar modifier”, “value”: “7% by weight of cement (approx. 3.5 kg per 50 kg bag)” },

{ “property”: “Coverage”, “value”: “1.5-2.0 m2/kg waterproofing coat (2 coats); 4.5-5.0 m2/kg per coat as bond coat” },

{ “property”: “Pack sizes / Shelf life”, “value”: “1, 5 & 20 Litre; 12 months from manufacture, unopened” }

],

“useCases”: [

{ “sector”: “Residential RCC repair, Delhi NCR housing societies”, “detail”: “Chajja and balcony-slab spalling repair, saw-cut, bond coat, patch with 7%-dosed mortar, as part of society AMC and monsoon-prep contracts” },

{ “sector”: “Institutional and commercial retrofit”, “detail”: “Bonding new screed toppings to old RCC roof slabs before a fresh waterproofing system goes down” },

{ “sector”: “Utility and back-of-house flooring”, “detail”: “Non-dusting toppings for store rooms, service corridors and light-traffic parking ramps” },

{ “sector”: “Bathroom, toilet and small terrace waterproofing”, “detail”: “Basic SBR slurry coat under tiling in sunken slabs, lift pits and small balconies, ahead of screed and tile-fixing” },

{ “sector”: “General masonry and plaster repair”, “detail”: “Bond coat for new plaster over old, painted or previously repaired masonry during renovation work” }

],

“faq”: [

{ “q”: “Will SmartCare Repair Polymer fix a damp or efflorescing wall?”, “a”: “No. It’s a bonding agent, mortar modifier and light waterproofing coat for sound concrete repair. The manufacturer’s own datasheet directs dampness and efflorescence issues to SmartCare DampBlock 2K instead.” },

{ “q”: “What mix ratio should I use it at?”, “a”: “It depends on the job: 1:2 by weight with cement for a waterproofing slurry coat, 1:1 for a bond coat, and 7% by weight of cement, roughly 3.5 kg per 50 kg bag, when using it to modify a repair mortar or render.” },

{ “q”: “Can I use it to waterproof an exposed terrace that collects rainwater?”, “a”: “Treat it as a preventive coat or bond coat under a full waterproofing system, not as the system itself. At 1.5-2.0 m2/kg in two brushed coats it’s a thin slurry, and terraces with standing water need a proper membrane.” },

{ “q”: “How soon can I tile or plaster over a bond coat?”, “a”: “While it’s still tacky, usually within the same working session. If the coat dries before the mortar or plaster goes on, apply a fresh coat rather than working over a dried film.” },

{ “q”: “What pack sizes can Space Arc supply?”, “a”: “The datasheet lists 1 L, 5 L and 20 L. For larger repair programmes we can also source bigger drums through the Asian Paints dealer network with a short lead time.” },

{ “q”: “Is it certified to an IS or ASTM standard?”, “a”: “The published datasheet doesn’t cite one, so for tenders that require a specific numbered standard it should be treated as a proprietary formulation rather than a code-rated product. We can recommend an alternative where that’s a hard requirement.” }

],

“positioning”: “Within the SmartCare range, Repair Polymer is the workhorse bonding and repair product: pair it with SmartCare DampBlock 2K where the real problem is dampness or efflorescence rather than a bond, and with SmartCare Crack Seal or Vitalia Neo where the job calls for a dedicated flexible waterproofing coat rather than a repair-mortar additive. For commercial and institutional specifications that need a more fully documented SBR bonding aid, larger projects, consultant-specified repair programmes, or tenders wanting broader technical backing than a retail datasheet provides, Fosroc’s Nitobond SBR is the closest genuine equivalent, and Space Arc stocks and applies both.”,

“fosrocAlternative”: {

“name”: “Nitobond SBR”,

“slug”: “fosroc-nitobond-sbr”,

“note”: “Specifiers on larger commercial retrofit jobs sometimes prefer Nitobond SBR when the tender needs a more fully documented bonding-aid data sheet with broader technical backing than SmartCare’s retail-facing TDS provides.”

}

}

The technical insight

Chemically, SmartCare Repair Polymer is a modified SBR dispersion, 40-42% volume solids, specific gravity 1.0-1.1, that film-forms as the water in the mix evaporates and co-polymerises through the curing cement matrix. That’s what gives the classic SBR benefits: a lower effective water-cement ratio, better flexural strength in thin repair mortars, and a mechanical-plus-chemical bond to the old substrate rather than just a mechanical key. It’s worth being precise about what this actually buys you, though: at 1.5-2.0 m2/kg coverage in two brushed coats, the ‘waterproofing coating’ use is a thin preventive slurry, not a membrane. For terraces or podiums that see standing water, specify it as a bond coat under a proper waterproofing system rather than as the waterproofing system itself.

Where it is used

• Repair of spalled concrete on RCC beams, columns, chajjas, balcony slabs and precast members
• Bond coat between old and new concrete before re-plastering, extensions or topping repairs
• Polymer-modified patch repair mortar (cement:sand 1:3 plus 7% dosage) for renders and screeds
• Basic preventive waterproofing coat for basement side walls, small terraces, toilet sunken slabs, lift pits and balconies
• Non-dusting floor toppings for utility, storage and light-traffic service floors
• Key/primer coat before tiling or stone cladding on vertical masonry, interior and exterior
• Shrinkage-crack control additive in general repair mortars on old and new construction
• Bonding new screed toppings to old RCC roof slabs ahead of a fresh waterproofing system

Key advantages

• One drum covers three jobs, bonding agent, mortar modifier and basic coating, cutting the SKUs a repair crew has to carry
• Priced for routine repair and maintenance work rather than specification-grade waterproofing budgets
• Simple bucket-and-brush application; no proportioning pumps or special mixing equipment needed
• Reduces drying and ageing shrinkage cracks in patch repair mortars
• Improves abrasion resistance under rubber-wheeled traffic, useful for service and utility floors
• SBR chemistry is familiar to most site masons, so training and supervision overhead stays low
• Backed by the Asian Paints dealer network for fast local restocking on ongoing repair or AMC contracts
• Small 1 L packs alongside 20 L drums suit scattered, balcony-by-balcony repair work

Limitations & considerations

• Not a dampness or efflorescence treatment; the manufacturer’s own literature redirects those jobs to SmartCare DampBlock 2K
• The waterproofing ‘coating’ use is a thin two-coat slurry, not a substitute for a proper elastomeric or 2K membrane on terraces exposed to standing water
• No IS, ASTM or BS compliance value is published in the datasheet, so it can’t be cited against a numbered-standard tender requirement
• Bond coat performance depends on overlaying the repair mortar while it’s still tacky, a site-sequencing dependency that adds coordination risk on larger jobs
• Results are highly sensitive to surface preparation (saw-cut edges, SSD condition); skipped prep is the most common cause of de-bonding
• 12-month shelf life from manufacture, so bulk 20 L drums bought ahead of a large repair programme need stock rotation

Selection & best practice

Specifications

Industry use cases

How we position Asian Paints SmartCare SmartCare Repair Polymer

Within the SmartCare range, Repair Polymer is the workhorse bonding and repair product: pair it with SmartCare DampBlock 2K where the real problem is dampness or efflorescence rather than a bond, and with SmartCare Crack Seal or Vitalia Neo where the job calls for a dedicated flexible waterproofing coat rather than a repair-mortar additive. For commercial and institutional specifications that need a more fully documented SBR bonding aid, larger projects, consultant-specified repair programmes, or tenders wanting broader technical backing than a retail datasheet provides, Fosroc’s Nitobond SBR is the closest genuine equivalent, and Space Arc stocks and applies both.

Related Concrete Admixtures products

View all Concrete Admixtures products →