About Fosroc Reebol EG

Fosroc Reebol EG belongs to the long-established Reebol family of formwork release agents, the brand most Indian site engineers simply call “shuttering oil.” Where ordinary diesel-and-waste-oil mixes leave stains, retarded surfaces and a poor bond for subsequent finishes, Reebol EG is a purpose-formulated blend of refined mineral oils and selected additives designed specifically to part hardened concrete from the mould without contaminating either surface. It is supplied ready to use as a low-viscosity, pale-straw to golden-yellow liquid that needs no dilution or mixing on site.

The “EG” grade sits at the economical end of the Reebol range. It is positioned for high-turnover work – conventional cast-in-situ RCC frames, columns, beams, slabs, retaining walls and repetitive precast elements – where contractors need a dependable, clean-stripping agent at a sensible rupee-per-square-metre cost. Because the product is oil-based and ready to use, there is no induction time, no emulsion to break and no shelf-life surprises from poorly stored water-thinned material, which makes it forgiving in the hands of a large, rotating site workforce.

On contact, the active additives in Reebol EG interact at the concrete-mould interface to form a thin release film. This film stops the cement matrix from gripping the shutter face, so panels and forms lift away cleanly rather than tearing the concrete skin or leaving cement build-up on the formwork. The practical result is a more even, fair-faced finish with fewer blow-holes and surface blemishes, less honeycombing at corners, and far less time spent scraping and cleaning shutters between pours. On steel formwork the oil film also acts as a temporary corrosion inhibitor, an important benefit in humid coastal and monsoon conditions common across much of India.

Space Arc Engineering supplies Reebol EG as an authorised Fosroc distributor serving Delhi NCR and projects Pan-India. As with any release agent, the grade should be matched to the job: Reebol EG is the workhorse oil-based choice, while water-based emulsion grades (Reebol Emulsion / Emulsion Xtra) suit jobs that demand the lowest possible staining risk or a near-odourless, lower-flammability product. Our technical team can advise on the right Reebol grade and realistic coverage rates for your shutter type and concrete mix.

The technical insight

A mould release agent works at the alkaline concrete-to-form interface. Oil-based chemical agents such as Reebol EG carry additives that react with the free lime (calcium hydroxide) generated as cement hydrates, producing a thin, water-repellent metallic-soap film at the boundary. That film breaks the adhesion and suction that would otherwise bond fresh concrete to the shutter, so the form releases with minimal pull on the green concrete surface. This chemical action is the key difference from neat mineral oil or diesel, which only provide a passive physical barrier and tend to leave oily stains, retarded “dusty” surfaces and patchy blow-holes. The trade-off to understand is dosage: too heavy a film causes pooling, surface retardation and bug-holes, while too thin a film risks local sticking – so the correct technique is a thin, even, continuous coat with all surplus wiped off. Being oil-based, Reebol EG has a relatively high flash point but is still a combustible petroleum product, so it is less suited than water-based emulsions to enclosed precast sheds where odour, overspray and fire-loading must be minimised.

Where it is used

• Cast-in-situ RCC frames – columns, beams, slabs and shear walls using steel or plywood shutters
• Repetitive precast elements such as boundary walls, paver moulds, kerb stones and lintels
• Tunnel-form, mivan-style aluminium and conventional ply systems for residential high-rise construction
• Retaining walls, water-retaining structures and basement raft/wall formwork
• Bridge and infrastructure formwork including pier caps, abutments and box-section shutters
• Fair-faced / architectural concrete where a clean, stain-free as-struck finish is required

Key advantages

• Economical, ready-to-use oil base – no dilution, mixing or induction time on site
• Clean, easy striking with reduced cement build-up on the shutter face
• Produces fair-faced, stain-free concrete with fewer blow-holes and surface blemishes
• Low viscosity gives higher coverage per litre than thick conventional mould oils
• Compatible with all formwork types – steel, plywood, timber and resinous (GRP) surfaces
• Inhibits corrosion of steel formwork, useful in humid and coastal Indian conditions
• Extends usable life of formwork and cuts cleaning time between pours
• Non-staining, so suitable even with white-cement and architectural finishes

Limitations & considerations

• Oil-based and combustible – less suitable than water-based emulsions for enclosed precast sheds where fire-loading and odour are concerns
• Over-application causes pooling, surface retardation and bug-holes; requires a thin, even film with surplus removed
• Coverage varies widely with shutter porosity and texture, so site trials are needed to confirm consumption rates
• Should be applied only to clean, dry formwork – dust, old concrete or rust under the film causes defects
• Not a curing compound or a permanent protective coating; it is a single-pour release film only
• Region-specific datasheet and safety sheet must be referenced, as exact figures can vary by market

Selection & best practice

Specifications

Industry use cases

How we position Fosroc Reebol EG

Reebol EG is the economical, oil-based workhorse of Fosroc’s Reebol shuttering-oil range. Within Fosroc, step up to the water-based Reebol Emulsion or Reebol Emulsion Xtra when you need the lowest staining risk, lower odour and lower flammability – typically for enclosed precast sheds and architectural fair-faced concrete – and consider Reebol Standard for general oil-based duty. Against the wider market, Reebol EG competes with mould release agents such as Sika Separol and the MBS, Dr. Fixit and STP (Pidilite) shuttering-oil ranges; the practical choice usually comes down to release performance on your specific shutter, staining tolerance and delivered rupee-per-square-metre cost. As an authorised Fosroc distributor, Space Arc Engineering can supply Reebol EG, benchmark it honestly against these alternatives, and pair it with complementary Fosroc systems – curing compounds (Concure range), repair mortars (Renderoc) and protective coatings (Dekguard / Nitocote) – to cover the full concrete placement and protection cycle.

Related Protective Coatings products

View all Protective Coatings products →