Asian Paints SmartCare SmartCare XtremoSeal Neutral

ASIAN PAINTS SMARTCAREAuthorised distributor

Asian Paints SmartCare SmartCare XtremoSeal Neutral

The odourless, neutral-cure silicone sealant that won’t corrode your aluminium frames or stain your stone

BrandAsian Paints SmartCareCategorySealants & Joint TreatmentFormA one-component, odourless, neutral-cure silicone sealant from Asian Paints’ SmartCare range, built to accommodate up…

What is it?

A one-component, odourless, neutral-cure silicone sealant from Asian Paints’ SmartCare range, built to accommodate up to 25% joint movement without releasing corrosive by-products as it sets.

Where is it used?

Around window and door frames, glass and partition joints, sanitary fixtures, and masonry/concrete construction joints in residential, interior fit-out, and light commercial work across Delhi NCR.

Why use it?

Its neutral-cure chemistry won’t corrode aluminium framing or brass hardware and won’t stain natural stone the way acetic-cure silicones can, while staying odourless enough to apply comfortably in occupied interior spaces.

How is it applied?

Gun-applied from a 280 ml cartridge directly into a clean, primed joint — on deeper joints a backer rod is packed in first, the bead is tooled within its skin-over time, and it’s left undisturbed to cure at room temperature; it cannot be painted once cured.

About Asian Paints SmartCare SmartCare XtremoSeal Neutral

**SmartCare XtremoSeal Neutral** is where Asian Paints’ SmartCare range answers a question every site engineer and every homeowner in Delhi NCR eventually asks: why does the sealant around my aluminium window frame turn black and pull away from the glass within a year? The usual culprit is an acetic-cure (acid-cure) silicone — the kind that smells sharply of vinegar as it sets — releasing acetic acid as it cures. That acid is fine on glass and ceramics but slowly attacks aluminium anodising, powder-coated frame edges, brass door furniture, and porous natural stone, staining and pitting them over successive monsoons. XtremoSeal Neutral swaps that acidic cross-linking chemistry for a neutral one, so it sets without releasing corrosive by-products, stays effectively odourless during application, and can safely sit against metal, marble, and painted surfaces that a cheaper acid-cure tube would gradually damage.

In practical terms it’s a one-component, gun-applied silicone sealant supplied in a 280 ml cartridge, rated to accommodate movement of up to 25% of the joint width — enough to absorb the routine expansion and contraction that Delhi’s swing between summer heat and winter cold puts through window frames, glazed partitions, and masonry construction joints. It’s positioned as an all-purpose sealant rather than a specialist structural-glazing or chemical-resistant grade: the job it’s built for is finishing and weatherproofing the everyday joints around a building — door and window perimeters, glass-to-frame gaps, sanitary fixtures, partition panels — where a clean, flexible, non-staining seal matters more than exotic chemical resistance. For Space Arc’s customers that mostly means residential renovation, interior fit-out, and bathroom/kitchen work across the NCR market, where an odourless neutral-cure sealant is genuinely easier to work with in occupied, ventilation-limited spaces than an acetic-cure alternative.

The technical insight

The one fact worth understanding before buying any silicone sealant is what “cure” chemistry it uses, because that’s what actually determines whether it’s safe on your substrate. Acetic-cure (acid-cure) silicones — the ones with the sharp vinegar smell as they set — cross-link by releasing acetic acid, which is why they’re cheap, cure fast, and work fine on glass and glazed ceramic. The problem is that same acetic acid attacks metals and alkaline, porous materials: it slowly corrodes aluminium anodising and powder coating, tarnishes brass, and can etch or stain marble, limestone, and other natural stone. Neutral-cure silicones like XtremoSeal Neutral use an alcohol- or oxime-based cross-linking system instead, so they cure without releasing anything corrosive — which is precisely why Asian Paints can position it as safe for aluminium window frames, sanitary brass fittings, and stone surrounds where an acid-cure tube would be a genuine long-term liability. It’s also why neutral-cure formulations read as close to odourless during application: there’s no acid off-gassing to smell. The trade-off, as with most neutral silicones, is that it needs a properly primed, contaminant-free surface and correctly sized backer rod on deeper joints to achieve reliable two-sided adhesion — the chemistry being gentler on your substrate doesn’t make it more forgiving of poor surface prep; if anything, get the prep step right and the rest of the job is straightforward gun-and-tool work.

Where it is used

  • Perimeter sealing of aluminium and UPVC window and door frames against masonry or plaster
  • Glass-to-frame and glazing joints in partitions, shopfronts, and curtain-wall touch-up work
  • Sanitary sealing around wash-basins, kitchen counters, bathtubs, and WC pans
  • Movement joints in masonry and concrete facades and internal walls
  • Metal-to-metal and metal-to-masonry joints on aluminium, stainless steel, and brass fittings
  • Wood-to-wood and glass-to-wood joinery gaps in doors, cabinets, and partition frames
  • Edge-sealing around grouted tiles where they meet a sanitary fixture or frame
  • Spot resealing and maintenance touch-ups on existing glazing or cladding joints

Key advantages

  • Neutral-cure chemistry releases no acetic acid on curing, so it won’t corrode aluminium window/door framing, brass hardware, or stain natural stone the way acid-cure silicones can over time
  • Virtually odourless during application and cure, which matters when sealing is being done inside occupied bedrooms, kitchens, or offices rather than an open construction site
  • Accommodates up to 25% joint movement, so it flexes with thermal expansion instead of cracking or debonding after a couple of seasonal cycles
  • Cures to a water-resistant, mould- and fungus-resistant seal, which suits the chronically damp conditions around Delhi NCR bathroom and kitchen fittings
  • Single-component, cartridge-and-gun application — no mixing, no pot life to race against, minimal wastage on small jobs
  • Bonds to a genuinely wide substrate range (glass, wood, masonry, concrete, aluminium, stainless steel, brass) so one tube covers most everyday sealing jobs instead of needing several specialist products
  • Backed by Space Arc’s authorised SmartCare distribution in Delhi NCR, so genuine stock, batch consistency, and applicator support are available locally rather than only through online marketplaces
  • Sits within a recognised, widely stocked national brand, which helps at resale/inspection time versus an unbranded tube of unknown cure chemistry

Limitations & considerations

  • Sold only in a 280 ml consumer/retail cartridge — economical for windows, doors, and sanitary joints on a home or a few flats, but not the pack format you’d want for large-scale facade or industrial joint sealing
  • Not a structural glazing sealant — it’s built for everyday building and sanitary joints, not load-bearing or structural silicone glazing applications, which need a dedicated structural-grade product
  • Asian Paints’ public product page is thin on lab-level data (specific gravity, tensile strength, tack-free time aren’t published there) — for engineered joint design, request the full technical data sheet from Asian Paints or your Space Arc contact before specifying
  • Cannot be over-painted once cured, so it’s the wrong choice wherever the joint finish needs to be painted to match the wall or frame colour
  • Performance depends heavily on surface prep — oily, dusty, or damp substrates are the most common cause of on-site adhesion failure, and this isn’t unique to this product but worth flagging for first-time users
  • Not a chemical- or pool-chlorine-resistant grade — avoid it on water-retaining structures, effluent tanks, or swimming-pool joints; that’s a different product category entirely

Selection & best practice

Treat surface preparation as the actual determinant of how long the joint lasts — clean the substrate to bare, sound material and wipe it dry and free of dust, oil, curing-compound residue, and old sealant before gunning a fresh bead; XtremoSeal Neutral, like any silicone, will not adhere reliably over contamination or a friable surface. On joints deeper than about 10 mm, pack a closed-cell backer rod first so the sealant forms the correct hourglass profile and bonds only on the two opposing faces (two-sided adhesion) rather than the joint base, which is what lets it stretch and compress without tearing. Mask both edges of the joint with tape before tooling, and tool the bead within its skin-over window for a clean, consistent finish — once a neutral silicone has fully cured it cannot be over-painted, so don’t promise a colour-matched painted finish over it; if the specification calls for a paintable joint, an acrylic or polyurethane sealant from the SmartCare range is the correct choice instead. Store cartridges in a cool, dry place and check the batch date before use, since partially cured sealant in an old tube will string and skin badly on the gun. For anything beyond routine building and sanitary joints — structural glazing, water-retaining structures, or chemical/pool exposure — treat this as the wrong product class and specify a dedicated structural or chemical-resistant sealant instead.

Specifications

Chemistry / system One-component, neutral-cure (non-acetic) silicone sealant
Odour Virtually odourless during application and cure
Movement accommodation Up to 25% of joint width
Pack size 280 ml (0.28 L) cartridge
Indicative MRP Approx. ₹420 per 280 ml cartridge, inclusive of taxes (confirm current price with Space Arc)
Corrosion behaviour Non-corrosive — safe on aluminium, stainless steel and brass framing/hardware
Water resistance Forms a water-resistant seal once cured
Fungal/mould resistance Resists mould and fungal growth in damp, humid conditions
Recommended substrates Glass, wood, masonry, concrete, sanitary ware, aluminium, stainless steel, brass

Industry use cases

Residential renovation

Sealing aluminium and UPVC window/door frame perimeters and glass partitions during flat and villa renovations, where odourless indoor application and non-staining performance on painted frames both matter

Bathroom and kitchen fit-outs

Sanitary-ware sealing around wash-basins, kitchen counters, and bath/shower surrounds, standing up to Delhi NCR’s humid monsoon conditions without supporting mould growth

Commercial interior fit-out

Partition glazing, door-frame joints, and cabin glass fixing in office and retail fit-outs, where a tidy single-component seal finishes the job faster than a two-part system

Facade maintenance and touch-up

Spot resealing of small glazing, cladding, or partition gaps during AMC and repair visits, rather than mobilising for full curtain-wall resealing

Metal fabrication and joinery

Sealing aluminium and stainless-steel window hardware, door tracks, and brass fittings in fabrication work where corrosion of the metal itself is the primary concern

Frequently asked questions

Is XtremoSeal Neutral safe to use on aluminium window frames?
Yes — that’s its main advantage over acetic-cure silicones. Because it’s a neutral-cure formulation it doesn’t release acetic acid as it sets, so it won’t corrode aluminium anodising, powder coating, or brass hardware the way an acid-cure sealant can over repeated monsoon cycles.
Can I paint over XtremoSeal Neutral once it has cured?
No. Like virtually all cured silicone sealants, it doesn’t accept paint well and adhesion will fail. If you need a joint that can be painted to match the surrounding wall or frame, ask about an acrylic or polyurethane sealant from the SmartCare range instead.
How much joint movement can it handle?
Up to 25% of the joint width, per Asian Paints’ product listing — enough for the routine thermal expansion and contraction most window, door, and partition joints see through a Delhi NCR summer-to-winter cycle.
What pack size does Space Arc supply, and is it enough for a full flat?
It’s sold in 280 ml cartridges. One cartridge is usually enough for perimeter sealing around a few windows/doors or a bathroom’s sanitary joints; for a full flat renovation or multiple units, order in bulk — talk to us for current stock and pricing.
Is it good for bathroom and kitchen sealing where things stay damp?
Yes, it’s formulated to resist water and mould/fungal growth, which is exactly the failure mode you see with cheap sealants around basins, counters, and tub surrounds in humid conditions.
What’s the difference between XtremoSeal Neutral and XtremoSeal GP?
Both are one-component silicone sealants with similar 25% movement capability, but GP is an acetic-cure (acid-cure) formulation while Neutral is neutral-cure. GP is perfectly fine on glass, ceramic tile, and non-reactive substrates and costs a little less; Neutral is the safer default whenever aluminium framing, brass fittings, or natural stone are involved.

How we position Asian Paints SmartCare SmartCare XtremoSeal Neutral

Within Asian Paints’ own SmartCare stable, XtremoSeal Neutral sits as the “safe default” sealant — reach for its sibling **XtremoSeal GP** (acetic-cure) only when you know the substrate is glass, ceramic, or another acid-tolerant material and want to save a little on cost, and step up to the professional-grade **SmartCare Unyverseal** range (Neutral, PU, Polysulphide, GP Advanced, Antifungal variants) when a project specifies a particular chemistry class for warranty or compliance reasons. For painted, colour-matched joints, **SmartCare Acrylmax** is the acrylic option in the same family. Outside the Asian Paints ecosystem, **Fosroc Nitoseal RTV** is the genuine equivalent worth naming to a specifier — also a single-component neutral-cure silicone, but engineered for higher movement capacity and stone-facade non-staining performance, so it’s the better call on curtain-wall or natural-stone-heavy projects where XtremoSeal Neutral’s general-purpose building/sanitary scope is a step short of what’s needed. Space Arc stocks and applies both lines, so the honest recommendation depends on the substrate and the joint, not the brand on the tube.

Preferred brand · Fosroc equivalent

Fosroc Nitoseal RTV — Specifiers doing curtain-wall or natural-stone facade work — where ±40% movement capacity and proven non-staining performance on marble and granite are needed — often step up to Fosroc Nitoseal RTV, a single-component low-modulus neutral-cure silicone built specifically for that duty, over XtremoSeal Neutral’s general building/sanitary-joint scope.

Compare with Fosroc Nitoseal RTV →

Source Asian Paints SmartCare SmartCare XtremoSeal Neutral for your project

Authorised distribution, technical advice & professional application across Delhi NCR and Pan-India.


Scroll to Top