About UltraTech Tilefixo Aqua Marine VT

Wet-area tiling is where most tile-fixing failures in Indian homes actually show up — not on a living-room floor, but on a bathroom wall or kitchen backsplash that sees water and steam every day. UltraTech Tilefixo Aqua Marine VT is the anti-damp member of UltraTech’s Tilefixo VT family: a cement-based, polymer-modified adhesive built for ceramic tiles, vitrified tiles, natural stone and glass mosaic on internal floors and walls, including tile-on-tile renovation work. It carries two separate certifications — Type 2T under IS 15477:2019 for the Indian market, and C2T under EN 12004:2017 / ISO 13007-1:2014, the international benchmark specifiers still reference — so it clears a government-spec checklist and an international one without needing a second product on the shelf.

In practice, the polymer modification is what separates this from a basic cement-sand bed: it lets the adhesive self-cure without a post-application water-curing regime, skips tile pre-soaking, and holds its bond after a tile has sat in a damp bathroom for years rather than just on the day it was laid. Space Arc supplies it in 20kg bags across Delhi NCR and pan-India as part of UltraTech’s authorised distribution network, alongside the rest of the Tilefixo range and the grouts that finish the job — which matters on real sites, because an adhesive is only as reliable as the substrate-prep, spacer and grout decisions that go with it.

The technical insight

The number that matters most on this data sheet is the tensile adhesion after water immersion: 1.00-1.10 N/mm², against an IS/EN minimum of 1.00 N/mm². That’s a thin margin, and it’s exactly why the polymer modification exists — plain cement-sand mortars lose grip fast once water gets behind a tile, which is how bathroom and kitchen tiles start sounding hollow within a year or two. Heat-ageing (1.10-1.20 N/mm²) and freeze-thaw results (1.04-1.15 N/mm²) matter less for Delhi NCR’s climate than the water-immersion figure does, but they confirm the polymer film isn’t just a marketing claim — it holds adhesion under repeated wet-dry and thermal cycling, which is the real stress a wet-area tile adhesive sees over its service life. The slip figure (0.30-0.40mm against a 0.5mm ceiling) is the other one worth reading: it’s what keeps a large vitrified tile from creeping down a wall before the adhesive sets.

Where it is used

• Bathroom and wet-area wall and floor tiling (ceramic and vitrified)
• Kitchen platforms, backsplashes and utility-area tiling
• Vitrified tile flooring in residential and builder-floor projects
• Natural stone fixing — marble and granite on internal floors
• Glass mosaic tile fixing on internal walls and floors
• Tile-on-tile renovation over sound, existing tiled floors
• Internal wall cladding over plaster, concrete or screed substrates
• Bathroom and kitchen retrofits in occupied Delhi NCR apartments

Key advantages

• No tile pre-soaking needed — saves water and site time versus older adhesive types
• Self-curing chemistry means no post-application water-curing regime to manage
• Slip held to 0.30-0.40mm, comfortably inside the 0.5mm IS/EN limit, so large-format and vertical tiles stay put while curing
• Bond strength retained after water immersion, heat ageing and freeze-thaw cycling — all above the 1.0 N/mm² IS/EN threshold
• Dual certification (IS 15477:2019 Type 2T + EN 12004/ISO 13007-1 C2T) covers domestic and international spec requirements in one bag
• Single-component, straightforward site mixing at 24-27% water by weight
• 30-minute open and adjustable time gives installers room to true up alignment before the mix skins over
• Works for tile-on-tile jobs, cutting demolition debris and downtime on renovation sites

Limitations & considerations

• Rated for internal dry and wet areas only — not for exterior façades, cladding or submerged/pool conditions
• Not suitable for flexible substrates such as fibre-cement sheet, plasterboard or timber
• Won’t bond directly to metal, glass, plastic, PU membranes or moisture-sensitive stones
• Short pot life (3 hours) and open time (30 minutes) demand disciplined batching, especially in peak Delhi summer heat
• Needs a sound, reasonably flat substrate first — heavy undulation still needs Rediplast RP or Floorkrete before this adhesive goes on
• Application is temperature-bound (5-50°C) and should avoid direct sun exposure while curing

Selection & best practice

Specifications

Industry use cases

How we position UltraTech Tilefixo Aqua Marine VT

Within Space Arc’s UltraTech Tilefixo range, Aqua Marine VT sits as the anti-damp specialist for wet-area work — pair it with Tilefixo VT White where a lighter substrate shade is wanted, step up to Tilefixo X’TRAPLUS for oversized/large-format porcelain, or Tilefixo Rapid where the 3-hour pot life doesn’t suit a tight site schedule; finish joints with Tilefixo Style Epoxy Grout or the more economical Tilefixo CG Grout. Fosroc’s India portfolio leans toward waterproofing, grouts and structural/anchoring adhesives rather than a direct C2T tile-fixing line, so it isn’t a genuine head-to-head alternative here. Specifiers comparing options typically weigh this against Sika’s SikaCeram-125 EasyFix or SikaCeram-288 Flex S1, STP Limited’s ShaliTile Fix 300, or Dr. Fixit Tilemaster — all cementitious, C2-class adhesives pitched at the same bathroom-and-kitchen segment.

Related Tile Fixing products

View all Tile Fixing products →